Technical data sheet
Engineering specification
Factory FOB specification. Fire, acoustic and emission classifications follow the accredited reports issued for this series — available under NDA with the shop-drawing package.
| Available SKUs | 76 |
|---|---|
| Core material | Extruded aluminium |
| Standard size | Type 5501, 5 mm edge trim |
| Thickness | 5 mm |
| Density | Per technical drawing |
| Composition | Aluminium alloy + multi-colour powder coat (matte black / gold / rose gold / graphite) |
| FOB price band (China) | $6.67 – $10.56/m |
| MOQ | 200 sqm / 500 m |
| Production lead time | 20 days |
All dimensions in millimetres unless stated. Prices are FOB China and exclude freight, duty and destination charges. Confirm against the project shop drawing before ordering.
Product Series
Metal Trim
金属收边系统 · Metal trim system · 76 patterns
- Price$6.67–10.56 /m²
- MOQ200 panels
- Lead time7 days
- Patterns76
Metal Trim full catalogue · Model 5501 5mm trim · 5mm. aluminium profile core. MOQ 200 panels, FOB $6.67–10.56 per m², 7 days lead time. 76 patterns available.
| Average FOB | $7.73/m |
|---|---|
| Price range | $6.67 - $10.56/m |
| MOQ | 200 panels / 500 m |
| Lead time | 20 days |
| Panel size | Model 5501 5mm trim |
| Thickness | 5mm |
| Core | aluminium profile |
| SKUs in series | 76 |
Product list
D10-9$7.73/sqm
D11-10Spec codeD11-10$7.73/sqm
D12-11$7.73/sqm
D13-12Spec codeD13-12$7.73/sqm
D14-13$7.73/sqm
D15-14$7.73/sqm
D16-15$7.73/sqm
D17-16$7.73/sqm
D18-17$7.73/sqm
D19-18Spec codeD19-18$7.73/sqm
D20-19$7.73/sqm
D21-20$7.73/sqm
D22-21Spec codeD22-21$7.73/sqm
D23-22$7.73/sqm
D24-23Spec codeD24-23$7.73/sqm
D25-24$7.73/sqm
D26-25Spec codeD26-25$7.73/sqm
D27-26Spec codeD27-26$7.73/sqm
D28-27Spec codeD28-27$7.73/sqm
D29-28Spec codeD29-28$7.73/sqm
D30-29$7.73/sqm
D31-30$7.73/sqm
G10-9$6.11/sqm
G11-10$5.56/sqm
G12-11$6.11/sqm
G13-12$6.67/sqm
G14-13$7.22/sqm
G15-14$6.11/sqm
G16-15$6.67/sqm
G17-16$6.11/sqm
G18-17Spec codeG18-17$6.67/sqm
G19-18$6.67/sqm
G20-19$7.22/sqm
G21-20$7.78/sqm
G22-21$10.00/sqm
G23-22$12.22/sqm
G24-23$7.22/sqm
G25-24$6.67/sqm
G26-25$7.22/sqm
G27-26$6.11/sqm
G28-27$7.22/sqm
G29-28$9.44/sqm
G30-29$15.56/sqm
G31-30$13.33/sqm
G32-31$12.78/sqm
G33-32$12.78/sqm
G34-33$7.22/sqm
G35-34$10.56/sqm
G36-35$12.78/sqm
G37-36$10.56/sqm
G38-37$4.44/sqm
G39-38$11.11/sqm
G40-39$11.67/sqm
G45-44$6.67/sqm
G46-45$7.22/sqm
G47-46$6.11/sqm
G48-47$5.56/sqm
G49-48$6.11/sqm
G50-49$5.56/sqm
G51-50$5.56/sqm
G52-51$6.67/sqm
G53-52$7.22/sqm
G54-53$5.56/sqm
G56-55$17.78/sqm
G57-56$8.89/sqm
K60-41$8.89/sqm
MT-002-2Spec codeMT-002-2$5.00/sqm
MT-003-3Spec codeMT-003-3$5.56/sqm
MT-004-4Spec codeMT-004-4$5.00/sqm
MT-005-5$6.67/sqm
MT-006-6$6.11/sqm
MT-007-7$8.89/sqm
MT-008-8$5.56/sqm
P60-42$10.00/sqm
UL08-43$6.67/sqm
Y20-40$5.56/sqm
Where Metal Trim is installed.
Metal trim decides whether a clad wall looks engineered or improvised. Every junction, external corner and movement gap is a trim decision — and there are thousands of them.
Hotel Public Areas
High-traffic zones judged at first sight.
Commercial & Public Buildings
Retail, office, healthcare and education projects.
How Metal Trim goes in.
Section profile, joint geometry and the fixing method that make this product behave on site.
Reveals are cut to the actual board depth, not foam-filled on site.
Extruded in the same line as the panels, so finish batches stay consistent.
A damaged length is cut out and swaged back without touching the panels.
What the fitter needs on site.
Send these five points to the installer with the drawing. Claims outside them are not covered.
Trim clips engage the panel groove every 300 mm; never screw through the visible face.
External corners set with a consistent 1–2 mm reveal, checked with a string line.
A dedicated movement profile every 8–10 linear metres, filled with backing rod.
Cut with a fine-tooth blade; aluminium requires a deburring pass to remove burrs.
Straight run within 2 mm over 2 m; mitres closed; no visible fixing holes.
Figures are factory recommendations for standard conditions. Movement joint spacing, fixing centres and substrate tolerance always defer to the project specification and local code.