Metal Trim · MT-005
Metal Trim · SKU MT-005
| MOQ | 200 ㎡ |
|---|---|
| Lead Time | 7 days |
| Specs | Model 5501 5mm trim |
| Thickness | 5mm |
| Core | 铝型材 |
| Material | 铝合金 + 多色喷涂（哑黑/哑金/玫瑰金/哑墨灰等） |
| Packing | Standard export carton (10-15 pcs/ctn) + corner protectors |
| Certifications | ISO 9001 · CE · ISO 14001 · FSC · SGS |
| Ports | Shenzhen / Foshan / Ningbo / Qingdao |
| Payment | 30% T/T deposit, 70% balance before shipment |
- Regarding this Metal Trim · MT-005 — can you send an actual sample?
- Free A4 samples provided; buyer covers shipping，3-5 working days to major port cities。
- Can MOQ be negotiated?
- Standard MOQ 200 pcs. Special projects can reduce to 50% MOQ with +8-12% price.
- How is lead time calculated?
- 收到定金后 7 天。常规订单 20+~30-7 天到达主要欧美/东南亚港口。
- Do you support OEM packaging?
- Yes. MOQ 500 pcs to print customer logo + barcode.
Frequently Asked Questions
Related Products
Where Metal Trim · MT-005 is installed.
Metal trim decides whether a clad wall looks engineered or improvised. Every junction, external corner and movement gap is a trim decision — and there are thousands of them.
Hotel Public Areas
High-traffic zones judged at first sight.
Commercial & Public Buildings
Retail, office, healthcare and education projects.
How Metal Trim · MT-005 goes in.
Section profile, joint geometry and the fixing method that make this product behave on site.
Reveals are cut to the actual board depth, not foam-filled on site.
Extruded in the same line as the panels, so finish batches stay consistent.
A damaged length is cut out and swaged back without touching the panels.
What the fitter needs on site.
Send these five points to the installer with the drawing. Claims outside them are not covered.
Trim clips engage the panel groove every 300 mm; never screw through the visible face.
External corners set with a consistent 1–2 mm reveal, checked with a string line.
A dedicated movement profile every 8–10 linear metres, filled with backing rod.
Cut with a fine-tooth blade; aluminium requires a deburring pass to remove burrs.
Straight run within 2 mm over 2 m; mitres closed; no visible fixing holes.
Figures are factory recommendations for standard conditions. Movement joint spacing, fixing centres and substrate tolerance always defer to the project specification and local code.