Metal Trim · G46
金属配件 · 型号 G46-45
| 最小起订量 | 200 平方米 |
|---|---|
| 交货周期 | 7 天 |
| 规格尺寸 | Model 5501 5mm 收边条 |
| 产品厚度 | 5mm |
| 芯材 | 铝型材 |
| 材质 | 铝合金 + 多色喷涂（哑黑/哑金/玫瑰金/哑墨灰等） |
| 包装方式 | 标准出口纸箱（10-15 片/箱）+ 四角护角 |
| 认证 | ISO 9001 · CE · ISO 14001 · FSC · SGS |
| 出运港口 | 深圳 / 佛山 / 宁波 / 青岛 |
| 付款方式 | 30% 电汇定金，70% 尾款于发货前付清 |
- 关于 G46-45 —— 可以寄实物样品吗？
- 可免费提供 A4 样品；运费由买方承担，3-5 个工作日寄至主要港口城市。
- 最小起订量可以协商吗？
- 标准最小起订量为 200 片。特殊项目可放宽至 50% 起订量，价格相应上浮 8-12%。
- 交货周期如何计算？
- 定金到账后 7 天开始生产。标准订单 30-45 天抵达欧美及东南亚主要港口。
- 支持 OEM 定制包装吗？
- 支持。500 片起订可印客户 logo 与条码，外箱同步定制。
常见问题
相关产品
Where Metal Trim · G46 is installed.
Metal trim decides whether a clad wall looks engineered or improvised. Every junction, external corner and movement gap is a trim decision — and there are thousands of them.
Hotel Public Areas
High-traffic zones judged at first sight.
Commercial & Public Buildings
Retail, office, healthcare and education projects.
How Metal Trim · G46 goes in.
Section profile, joint geometry and the fixing method that make this product behave on site.
Reveals are cut to the actual board depth, not foam-filled on site.
Extruded in the same line as the panels, so finish batches stay consistent.
A damaged length is cut out and swaged back without touching the panels.
What the fitter needs on site.
Send these five points to the installer with the drawing. Claims outside them are not covered.
Trim clips engage the panel groove every 300 mm; never screw through the visible face.
External corners set with a consistent 1–2 mm reveal, checked with a string line.
A dedicated movement profile every 8–10 linear metres, filled with backing rod.
Cut with a fine-tooth blade; aluminium requires a deburring pass to remove burrs.
Straight run within 2 mm over 2 m; mitres closed; no visible fixing holes.
Figures are factory recommendations for standard conditions. Movement joint spacing, fixing centres and substrate tolerance always defer to the project specification and local code.